Wooden Blinds in Delhi NCR
Real basswood and faux wood venetian blinds — 25, 35 or 50 mm slats, ladder cord or decorative tape, tilted precisely for exactly the light you want.
Warm premium look | Precise slat tilt | Real wood & faux wood



Real Wood or Faux Wood?
| Factor | Real Wood (Basswood) | Faux Wood |
|---|---|---|
| Look | Genuine grain, warmer, more premium | Convincing but flatter grain |
| Humidity | Warps and swells — dry rooms only | Unaffected — kitchens, bathrooms, utility |
| Weight | Lighter for the same slat size | Heavier — limits width sooner |
| Cost | Higher | Considerably lower |
| Cleaning | Damp cloth only, dried immediately | Wipes clean freely |
| Colour stability | Can lighten in strong direct sun | Holds colour better |
| Best for | Living rooms, bedrooms, studies | Kitchens, bathrooms, rentals, budget |
For a fuller comparison including cost and durability, see wooden vs PVC blinds.
Slat Width
25 mm
Fine, detailed look. Small windows, traditional interiors, and where the blind should read as texture rather than as slats.
35 mm
The middle ground — more presence than 25 mm without dominating a modest window.
50 mm
The popular choice for living rooms. Bolder, shows more grain, clearer view when tilted open, fewer slats to dust.
Specifications
| Property | Commonly Available Options |
|---|---|
| Slat materials | Real basswood; faux wood (PVC / composite) |
| Slat widths | 25 mm, 35 mm, 50 mm |
| Slat support | Ladder cord (standard) or decorative fabric tape |
| Finishes | Natural wood stains, painted whites and greys, woodgrain prints on faux |
| Operation | Cord lift with wand or cord tilt; cordless and motorised options |
| Head & bottom rail | Matching timber or moulded rail; valance available to cover the head |
| Mount | Inside or outside the recess; wall or ceiling fixed |
| Width limits | Split into two units at a narrower width than roller or zebra — slats are heavy, and faux wood heavier still |
These are the options commonly available in the Indian market. Exact stocked slat widths, stains, tape options and maximum widths are in the slat card.
Ladder Cord or Decorative Tape
Standard wooden blinds carry the slats on thin ladder cords, and each slat has small holes where the lift cord passes through. Those holes let pinpoints of light through when the blind is closed — usually unnoticeable, occasionally annoying in a bedroom.
- Ladder cord — standard, economical, slightly more visible hardware, pinhole light when closed
- Decorative tape — a fabric strip that hides the holes, blocks the pinhole light, and gives a more tailored finish. Costs more, and is worth it at eye level or in a bedroom
- Valance — a matching timber cover across the head rail; the detail that makes a wooden blind look built-in rather than fitted
Where Wooden Blinds Work Best
Care
- Dust with a soft brush or vacuum brush attachment, slats closed flat, then reversed and done again. Slats show dust far more than fabric.
- Real wood: damp cloth only, dried immediately. Never let water sit on timber slats and never use a wet cloth along the grain.
- Faux wood: wipe freely with a damp cloth and mild detergent — the practical advantage that makes it right for kitchens.
- Tilt closed before raising. Raising a blind with slats tilted open is what bends slats and stresses the cords.
- Do not force a stuck cord. On a heavy wooden blind, forcing the lift mechanism is how head rails get damaged.
- Keep real wood out of driving rain through an open window — an afternoon of monsoon spray does lasting damage.
What Determines the Price of Wooden Blinds
We quote per window rather than publishing a rate card. The drivers:
- Real wood or faux wood — the biggest factor by a wide margin; basswood costs considerably more than a moulded faux slat
- Slat width — wider slats use more material per blind, though they need fewer slats
- Window area — priced largely by size, and wooden blinds are among the heavier products, so large units cost more in both material and hardware
- Ladder cord or decorative tape — tape adds material and labour and gives a more finished result
- Finish — standard stains are the value option; specialist paints and premium finishes cost more
- Valance — a matching head cover is an extra but is what makes the blind look built-in
- Mechanism — cord lift is the baseline; cordless and motorised cost more, and motorisation matters more here than on light blinds because these are heavy to raise
- Splitting wide windows — wooden blinds split earlier than other types, so a wide window may need two units where a roller would not
Supply Across Delhi NCR
We measure, supply and install wooden blinds from Noida (U.P.) and Faridabad (Haryana), covering Noida, Greater Noida, Faridabad, Delhi, Gurgaon and Ghaziabad. At measurement we check stack depth for wide slats, confirm whether the window is dry enough for real timber, and advise where faux wood is the better specification.
Wooden blinds are heavy units. Please arrange gate entry and lift access in advance and tell us the floor when booking.
Frequently Asked Questions
What is the difference between real wood and faux wood blinds?
Can wooden blinds be used in a bathroom or kitchen?
What slat width should I choose for wooden blinds?
Are wooden blinds heavy, and does that limit the width?
What is the difference between ladder cord and decorative tape?
How much do wooden blinds cost?
What is the minimum order, and do you install in Noida, Faridabad, Gurgaon and Delhi?
Real Wood or Faux? We'll Tell You Straight
Book a free measurement and we'll check the room's humidity exposure, stack depth and width, and recommend basswood or faux wood per window — including where faux saves you money without anyone noticing.
Related: All Blinds, PVC Blinds, Zebra Blinds, Roller Blinds · Guides: Wooden vs PVC Blinds, How to Measure, Wooden Flooring for Bedroom
Slat materials, widths, finishes and mechanisms described here are the options commonly available in the Indian market and are general guidance, not a stock list or quotation. Real timber is a natural material: grain and shade vary between slats and batches, and timber is not suitable for humid or wet locations. Maximum single-unit width depends on slat material and weight and is confirmed at measurement.