Commercial Solutions

Commercial Flooring, Wall & Window Solutions in Delhi NCR

Offices, retail, restaurants, schools and industrial sites — specified for traffic, slip resistance and compliance, installed around your operating hours.

Single-visit site survey | Phased & out-of-hours installation | GST invoice & PO supply

A commercial floor is judged on different criteria from a domestic one. Nobody asks whether an office carpet tile is beautiful; they ask how it performs under a thousand footfalls a day, whether a damaged tile can be swapped without relaying the floor, and whether it can be installed over a weekend without stopping work. This page covers how we work at project scale, and takes you to the specification for your sector.

Luxury vinyl flooring installed across a corporate office floor plate in Delhi NCR — Corporate office fit-out

Retail showroom flooring installed with zoned finishes between display and walkway areas — Retail & showroom

Flooring installation in progress overnight in an occupied commercial building — Out-of-hours installation

Solutions By Sector

Office Interior Solutions

Carpet tiles, LVT and SPC flooring, wall panelling, ceilings, blinds and acoustic treatment for open plan and cabin layouts.

Retail & Showroom Flooring

Heavy-footfall finishes that hold their appearance, with entrance slip control and zoning that directs customers without competing with merchandise.

Restaurant & Café Flooring

Slip resistance where grease and water meet a hard floor, hygienic cleanable surfaces back of house, and finishes that survive spills front of house.

School & Play Area Flooring

Impact absorption in play areas, anti-slip corridors, cleanable classroom floors and acoustic treatment that makes teaching audible.

Industrial Sheet Solutions

Roofing and daylighting sheets, chemical-resistant linings, machine guarding, matting, gaskets and cladding for factories and warehouses.

Clinics, Gyms & Salons

Hygienic and impact-absorbing specifications. See our guides to clinic and hospital flooring and gym flooring options.

Why Commercial Specification Is Different

The four things a domestic buyer never has to think about, and a commercial one is answerable for:

Requirement	What It Means in Practice
Traffic rating	Domestic-grade material in a commercial corridor wears through in a fraction of its expected life. Wear layer thickness on vinyl and LVT is the figure that matters, not the pattern
Slip resistance	A liability question, not a comfort one — entrances in monsoon, kitchen floors, wet areas and ramps all need a specified anti-slip performance
Fire compliance	Many buildings and fit-out approvals require fire-rated materials with documentation. Verbal assurance does not satisfy a landlord's checklist or a fire officer
Maintainability	Can a damaged section be replaced without redoing the floor? Carpet tiles and LVT can; sheet vinyl and tiles are harder. This decides five-year cost, not day-one cost

On slip resistance and fire ratings, insist on documentation. Where a rating is required, it must come from the manufacturer's certification for the specific product supplied — not from a description in a quotation. We will tell you plainly when a product carries a documented rating and when it does not, because that distinction is the one that matters if there is ever an incident or an inspection.

How a Project Runs

Stage	What Happens
1. Site survey	One visit. Areas measured and logged by room or zone reference, subfloor condition assessed, access and occupancy constraints recorded
2. Specification	Material and grade per zone, with any slip resistance or fire requirements confirmed in writing before quoting
3. Quotation	Consolidated, with material, subfloor preparation, accessories and installation as separate lines so you can see what is included
4. Subfloor preparation	Levelling and moisture checks where needed — the stage most often skipped and the most common cause of failure
5. Phased installation	Evenings, weekends, or zone by zone so operations continue. Agreed at survey stage, not improvised
6. Handover	Site cleaned, spare material from the same batch retained for future repairs, specification documented for re-ordering

The subfloor decides the outcome. Most commercial floor failures we are called to inspect are preparation failures, not product failures — laid over damp screed, laid over an uneven surface, or laid with no acclimatisation. Our installation and subfloor preparation guide sets out the standards we work to, including the flatness and moisture checks that should happen before any material arrives.

What We Supply Commercially

FlooringCarpet tiles, LVT, SPC, vinyl sheet and roll, artificial grass

Entrance mattingTraps dirt and water before it reaches the main floor

Wall panellingPVC and decorative panels, ACP and HPL cladding

CeilingsPVC ceiling panels for washable and damp-prone areas

Blinds & curtainsVertical and zebra blinds, FR-option commercial curtains

Industrial sheetsPolycarbonate, FRP, PVC, HDPE, rubber, ACP

Acoustic treatmentCarpet, heavy curtains and panelling to control echo

Safety netsBalcony, shaft and common-area netting

Packaging materialsBulk foam, bubble, tape and strapping supply

Commercial Capability & Product Guide Sector specifications, material grades and wear ratings, compliance documentation available, and our project process.

Download PDF

Completed Projects

Commercial buyers reasonably want to see comparable work before appointing anyone. These are documented projects with the specification and approach set out:

Corporate office luxury vinyl flooring — full floor plate, phased installation
Office vinyl flooring, Gurgaon
SPC flooring installation, Greater Faridabad
PVC wall panel installation, Greater Noida West
Wider interior project gallery

Procurement

GST invoice provided on all commercial supply
Purchase order supply can be arranged, with quotation on letterhead and agreed payment terms
Consolidated quotations with material, preparation, accessories and labour as separate lines — so you can compare like with like against other quotes
Zone-by-zone pricing where a project will be phased across budget periods
Documentation at handover — product specification, batch details and any compliance certification for the material supplied

For a comparable quotation, send a floor plan or area schedule with zone references and approximate areas, tell us the use of each zone, state any fire or slip resistance requirement, and give your available installation window. That is enough for a firm consolidated quote without a site visit — though we will still survey before manufacture or ordering.

What Determines the Price of a Commercial Project

Commercial work is quoted per project, not from a rate card. The drivers, roughly in the order they move the number:

Material and grade — commercial wear ratings, fire-rated and certified anti-slip products cost more than domestic-grade equivalents, and the certification is part of what you are paying for
Total area — the main lever; rate per sq ft falls materially at project scale
Subfloor condition — levelling, screed repair and moisture treatment can rival the flooring cost on a bad substrate, and cannot be assessed from a photograph
Installation window — out-of-hours, weekend and phased work carries a labour premium over continuous access to an empty site
Zoning complexity — many small zones with different materials and transitions cost more per sq ft than one large open area
Accessories — skirting, transitions, coving, entrance matting and edge trims are a real line, not a rounding item
Access — upper floors, service lift restrictions and limited unloading windows all add time
Programme risk — work squeezed into a very short shutdown window needs more people on site at once

The honest advice on comparing quotes: check what each one says about subfloor preparation. A quote that is materially cheaper usually excludes levelling, and that cost does not disappear — it arrives later as a variation, or as a floor that fails inside two years and gets blamed on the material.

Supply Across Delhi NCR

We work from Noida (U.P.) and Faridabad (Haryana), covering commercial projects across Noida, Greater Noida, Faridabad, Delhi, Gurgaon and Ghaziabad — offices and corporate fit-outs, co-working spaces, retail and showrooms, restaurants and cafes, schools, clinics, gyms, salons, warehouses and factories.

For occupied commercial buildings, please arrange gate entry, service lift access and any building fit-out permission in advance, and tell us occupancy hours at the survey stage. Material access through service lifts and stairwells is the usual programme constraint on upper floors.

Frequently Asked Questions

Can you install without shutting down our operations?

Yes — most of our commercial work is phased. That means evenings, weekends, or zone by zone so part of the site stays in use while another part is worked on. It needs agreeing at survey stage rather than improvised on site, because it affects the labour plan and the programme. Out-of-hours work carries a premium over continuous access to an empty site, and we will show that as a separate line so you can decide.

Why is commercial-grade flooring more expensive than domestic?

Because it is built to survive traffic that domestic material is not. On vinyl and LVT the critical figure is wear layer thickness, and a domestic-grade wear layer in a commercial corridor wears through in a fraction of its expected life. Commercial products may also carry documented fire and slip resistance ratings, and that certification is part of the cost. The five-year cost of the correct grade is almost always lower than replacing the wrong one.

Do you provide fire-rated and anti-slip certified materials?

Where a rating is required we supply a product that carries it, with the manufacturer's certification for that specific product. What we will not do is describe a material as fire-rated or anti-slip without documentation, because that satisfies nobody at an inspection and exposes you rather than us. Tell us the requirement at survey stage - it changes the specification, and retro-fitting a compliant material across a completed floor is a full re-do.

Do you handle subfloor preparation, or just supply and lay?

We assess the subfloor at survey and include the preparation needed in the quotation, because laying over an uneven or damp substrate transfers the problem to your new floor. Flatness should be within about 3 mm under a 2 metre straightedge, and the slab must be dry before anything goes down. If a quote you are comparing is silent on preparation, that is usually where the difference in price is.

Can a damaged area be repaired later without redoing the floor?

With carpet tiles and LVT, yes - individual tiles or planks can be lifted and replaced, which is a major reason both dominate commercial specification. With sheet vinyl and tiles it is harder and the repair is more visible. Either way, keep spare material from the original batch at handover: dye lots and production runs shift, so material bought two years later rarely matches, and we retain the specification so it can be re-ordered correctly.

How do you quote a commercial project?

Per project, not from a rate card. The drivers are material grade, total area, subfloor condition, installation window, zoning complexity, accessories and access. Send a floor plan or area schedule with zone references, the use of each zone, any fire or slip requirement, and your available installation window - that is enough for a firm consolidated quotation with separate lines. We still survey before ordering. GST invoice provided; PO-based supply can be arranged.

Do you work across Noida, Faridabad, Gurgaon and Delhi?

Yes - commercial projects across Noida, Greater Noida, Faridabad, Delhi, Gurgaon and Ghaziabad from our Noida and Faridabad locations, covering offices, retail, restaurants, schools, clinics, gyms, warehouses and factories. For occupied buildings please arrange gate entry, service lift access and fit-out permissions in advance, and tell us occupancy hours at survey stage.

Book a Commercial Site Survey

Send a floor plan or area schedule and we'll survey in one visit, assess the subfloor honestly, confirm any compliance requirements, and return a consolidated quotation with installation phased around your operating hours.

Call Now WhatsApp Enquiry

Sectors: Office, Retail & Showroom, Restaurant & Café, School & Play Area, Industrial Sheets · Guides: Best Flooring for Office, Shops & Showrooms, Clinics & Hospitals, Gym Flooring, Installation & Subfloor Prep

Material grades, performance characteristics and compliance options described here are general guidance, not a quotation. Fire performance and slip resistance depend on the specific certified product supplied and must be confirmed against the manufacturer's test documentation and the requirements applicable to your building. Subfloor condition can only be assessed on site and materially affects both cost and outcome.